REGULATORY COMPLIANCE

 MIL HDBK 274 Electrical Grounding for Aircraft Safety

NAVAIR 17-1-537 Aircraft Securing and Handling Procedures

Australian Government, Civil Aviation Safety Regulations AC 21-99 Aircraft Wiring and Bonding

TM 1-1500-250-23 Intermediate Maintenance for General Tie Down and Mooring on all Series AH-64, UH-60, CH-47, UH-1, AH-58 Helicopters

MIL HDBK 1021/4 Rigid Pavement Design for Airfields

ANSI/IEEE Standard 142 Grounding of Industrial and Commercial Systems

Unified Facilities Criteria (UFC) 3-260-01 Airfield and Heliport Planning and Design (as per USAF Civil Engineer Support Agency, US Army Corp of Engineers, and Naval Facilities Engineering Command)

FAA AC 20-35C Tie Down Sense

FAA AC 150/5390-2B Heliport Design - Chapter 2, General Aviation Heliports, Section 208- Helicopter Parking, Paragraph h - Tie Downs

14 CFR Aeronautics and Space, Part 25 - Airworthiness Standards, Subpart C - Structures, Section 25.519 - Jacking and Tie Down Provisions

14 CFR Aeronautics and Space, Part 25 - Airworthiness Standards, Subpart D - Structures, Section 25.607 - Fasteners


Civil Aviation Authority (CAA): CAP 437 Offshore Helicopter Landing Areas - Guidance on Standards International Civil Aviation Organization (ICAO): Annex 14 - Heliport Design

American Petroleum Institute (API): Recommended Practice 2L, Recommended Practice for Planning, Designing and Constructing Heliports for Fixed Offshore Platforms

American Bureau of Shipping (ABS): MODU, Part 4 - Machinery and Systems, Chapter 3 - Electrical Installation, Section 1 - General, Sub Section 12 – Grounding Arrangements

American Bureau of Shipping (ABS): SVR, Part 3 - Hull Construction & Equipment, Chapter 2 - Hull Structures and Arrangements, Section 11 - Superstructures, Deckhouses and Helicopter Decks, Sub Section 11 - Helicopter Decks, Paragraph 11.1 – General

American Bureau of Shipping (ABS): High Speed Naval Craft (HSNC), Part 3 - Hull Construction and Equipment, Chapter 2 - Hull Structures and Arrangements, Section 2 - Design Pressures, Sub Section 11.5 - Helicopter Decks

American Bureau of Shipping (ABS): High Speed Naval Craft (HSNC), Part 3 - Hull Construction and Equipment, Chapter 2 - Hull Structures and Arrangements, Section 5 - Hull Structures and Arrangements, Sub Section 1.15 - Helicopter Landing Areas, Paragraph 1.15.1 General

Det Norske Veritas (DNV): DNV-OS-E401 Helicopter Decks, Chapter 2 - Technical Provisions, Section 4 Miscellaneous, Sub Section B - Safety Net and Tie-Down Points, Section Paragraph B 200 - Tie Downs Point

Det Norske Veritas (DNV): DNV-OS-E401 Helicopter Decks, Chapter 5 - Safety Requirements, Section A - Safety Requirements, Sub Section - A 200 Securing of Helicopter Onboard

International Maritime Organization (IMO): Maritime Safety Committee - Resolution MSC 63-23, Code for the Construction and Equipment of Mobile Offshore Drilling Units, Provisions for Helicopter Facilities, Chapter 13 - Helicopter Facilities, Section 13.4 - Arrangements, Paragraph 13.4.2